Specialist in Plate Heat Exchangers

OffshoreMarinePower PlantsFoodPharmaceuticalChemicalIndustryHVAC

Plate Heat Exchangers Spare Parts – All brands for all types of
Plate Heat Exchangers and Fresh Water Generators

PHE Plates

Plates

PHE Gaskets

Gaskets

Fresh Water Generators

Fresh Water Generators

Services

Services

All Spare Parts are quality controlled at our own lab, to ensure 100% compatible with original makers.

Every PHE plate and gasket at our storage are made of traceable materials, so all our products meet the best OEM specifications

With more than 20 years of experience within repair and replacement spare for Plate Heat Exchangers and Fresh Water Generators, PHE Nordic has a lot of knowledge about each Plate Heat Exchanger type. We know that high quality is key, when it comes to Spare Parts for Plate Heat Exchangers and Fresh Water Generators. Poor quality of Spare Parts can result in future unnecessary problems with end customers Heat Exchanger, creating unnecessary costs. High quality for us, is when our products match the original maker, in both quality material and dimensions. These factors are crucial for us and for end customers.

PHE Nordic has many years of experience as Heat Exchangers Spare Part supplier for the Offshore, Oil & Gas Industry, and we know the importance of the necessary certificates and licenses. That is why PHE Nordics QHSE are in contact with several independent third party laboratories and organizations, to achieve the needed qualifications and maintain our position as a supplier for various industries. Below you will find a list of the documents:

PHE Nordic’s International Certificates:

Explore Plate Heat Exchanger Brands

PHE Nordic provides services and spare parts for wide range of international brands:

Plate Heat Exchangers (PHE) – Fresh Water Generators (FWG) – Gasketed Plate Heat Exchangers (GPHE)

All PHE Gaskets and Plates are produced under approved production conditions, and both Rubber compounds and Plate material are analyzed on a third-party lab. Entrance material-control for Plates and gaskets is made at our own lab, to ensure compliance with certificates.
In general, all Spare Parts are quality controlled in our own lab, to ensure 100% compatible with original makers. Gaskets are tested on OEM Plates to ensure the fit is within the given tolerances. The quality is not only relevant for our Spare Parts, but also our services. For various industries, we offer a documentation package, when refurbishing Plate Heat Exchanger or Fresh Water Generator. The documentation package shows and document the refurbishment process. If a complete Plate Pack is needed, we have the correct A-measurement and our service team is ready to conduct a pressure-test before shipment.

Why choose PHE Nordic as your supplier?

➤ To shorten delivery time, the most widely used gaskets and plates are in stock

➤ High quality and competitive prices on our gaskets and plates

➤ Quality control of our spare parts in our own lab

➤ Our gaskets and plates have full traceability

➤ The necessary certificates for various industries are applied, among other: ISO9001, ISO45001 and ISO14001

➤ We focus on your needs, so you can spend time on other matters

➤ You are receiving OEM quality Spare Parts

There are many benefits, when choosing PHE Nordic as your all-brand supplier

WE FOCUS ON YOUR NEEDS

Your Service Provider

Offshore – Marine – Power plants – Food  Pharmaceutical – Chemical – Industry – HVAC

VIEW ALL SERVICES

Every PHE plate and gasket at our storage are made of traceable materials, so all our products meet the best OEM specifications. Gaskets are produced of traceable materials and any batch of any Gasket type is lablled with a unique barcode, to ensure traceability. Our PHE Plates are laser engraved with type, high/low tater, material quality, thickness and given a unique certificate number, to ensure full traceability. No matter Service, PHE Spare Parts or Special Components you need, our team is ready to guide you and to ensure the highest quality possible for your Plate Heat Exchanger.

PHE Nordic

PHE Nordic’s service center offers PHE repair, reconditioning and cleaning of Plate Heat Exchangers, including:

Chemical cleaning of plates and mounting of new gaskets for your Plate Heat Exchanger.

Leak detection method Dye-penetration and Helium.

Reconditioning of frames for Plate Heat Exchangers.

Pressure testing of Plate Heat Exchanger.

How it Works

Heat Exchangers (HEX) or Plate Heat Exchangers (PHE), also known as Plate and Frame Heat Exchangers, are built of loose plates and gaskets, with fluid on each side of the plates. The design of the plate and gasket ensures, there is no contamination from the hot to the cold side. The design of the pattern on the plates ensures the heat transmission will be as efficient as possible, by creating turbulence. The pattern on the plates are in many cases using the herring bone pattern, and the angle of this will detriment the pressure drop.

A Heat Exchanger is a system used to transfer heat between two or more fluids. Heat exchangers are used in both cooling and heating processes. Either a solid wall separates the fluids, to prevent mixing, or the fluids are in direct contact. They are widely used in space heating, refrigeration, air conditioning, power stations, chemical plants, petrochemical plants, petroleum refineries, natural-gas processing, and sewage treatment.

A plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger, because the fluids are exposed to a much larger surface area, since the fluids are spread out over the plates. This facilitates the transfer of heat, and greatly increases the speed of the temperature change. Plate heat exchangers are now common and even small brazed versions are used in the hot-water sections in millions of combination boilers. The high heat transfer efficiency for such a small physical size has increased the domestic hot water (DHW) flowrate of combination boilers. The small plate heat exchanger has made a great impact in domestic heating and hot-water. Larger commercial versions use gaskets between the plates, whereas smaller versions tend to be brazed.
PHE Nordic provides services and spare parts for various numbers of Plate Heat Exchangers (PHE) – Heat exchanger (HEX) – Plate and Frame or Gasketed plate heat exchanger (GPHE) to a wide range of international brands. Plates for Heat ExchangerGasketed Plate Heat ExchangerGaskets for Plate Heat Exchanger, or Fresh Water Generators.

Production and Quality
High quality for us, is when our products match the original maker, in both quality material and dimensions. These factors are crucial for us and for end customers. All of our Gaskets and Plates are produced under approved production conditions, and both Rubber compounds and Plate and Gasket material are analyzed on a third-party lab. Entrance material-control for Plates are made at our own lab, to ensure compliance with certificates.
In general, all Spare Parts are quality controlled at our own lab, to ensure 100% compatible with original makers. Gaskets are tested on OEM Plates to ensure the fit is within the given tolerances. The quality is not only relevant for PHE Spare Parts, but also our services. For various industries, we offer a documentation package, when refurbishing Plate Heat Exchanger or Fresh Water Generator. The documentation package shows and documents the refurbishment process, If a complete Plate Pack is needed, our service team is ready to conduct a pressure-test before shipment.

Contact our sales team today for further information and offers:

➤ End Users

E-mail: phe@phe-nordic.com     

➤ Wholesalers/Dealers                 

E-mail: newphe@phe-nordic.com               

Phone: +45 70 202 303

Plate Heat Exchanger Experts

➤ To shorten delivery time, the most widely used gaskets and plates are in stock

➤ High quality and competitive prices on our gaskets and plates

➤ Quality control of our spare parts in our own lab

➤ Our gaskets and plates have full traceability

➤ The necessary certificates for various industries are applied, among other: ISO9001, ISO45001 and ISO14001

➤ We focus on your needs, so you can spend time on other matters

➤ You are receiving OEM quality Spare Parts